Skip to content
Indigo Painting & Tub Refinishing LLC logo

Care guide

How to Care for a Refinished Bathtub or Tile Surface

Congratulations on your newly refinished surface. It lasts longest when you keep it dry, clean it after each use with non-abrasive cleaners, and avoid harsh chemicals, rubber mats, and sharp impacts. Follow the steps below and your finish should stay bright for many years.

The first 24 to 48 hours

  • Do not use the surface for 24 to 48 hours after refinishing so the finish can cure.
  • When you remove the masking paper, peel it off slowly, upward and outward, and take extra care around the drain.

Everyday care

  • Clean the surface after each use to prevent soap scum build-up.
  • Dry the faucets, the drain, and the shower fixtures every evening, and close the taps tightly.
  • Fix leaks right away. There should be no standing water in the tub, and the surface should be completely dry for a couple of hours after each use.

What to clean with

  • Use non-abrasive cleaners such as Lysol Tub and Tile Cleaner, 409, Windex, Fantastic, or Scrubbing Bubbles.
  • Do not use abrasive cleaners. They scratch the finish.

What to keep off the finish

  • Soap, bottles, and washcloths: put them on a shampoo rack instead of laying them on the surface.
  • Rubber mats, especially mats with suction cups: they can react with the finish under hot water. Use a non-rubber, slip-proof bath mat and remove it after each use.
  • Acid-based products such as drain openers and tile grout cleaners.
  • Beauty chemicals such as cosmetics, bleach, hair dye, and perfume, which can stain or mar the finish.
  • Sharp objects: a dropped object can chip the finish.

Keep the caulk sealed

The caulk line between the tub and the tile, and any other joints, must stay properly sealed at all times. Re-caulking is the customer's responsibility.

When to call us

If you see peeling, bubbling, cracking, or fading, contact us within 48 hours of noticing it. If a sharp object chips the finish, call us right away, within one to two weeks of the accident, so we can repair it. Call (908) 356-1602 or send photos through the quote form.

Care questions

How long should I wait before using a refinished bathtub?

Do not use the surface for 24 to 48 hours after refinishing, so the finish can cure fully.

What can I use to clean a refinished tub?

Use non-abrasive cleaners such as Lysol Tub and Tile Cleaner, 409, Windex, Fantastic, or Scrubbing Bubbles, and clean after each use to prevent soap scum. Avoid abrasive cleaners, which scratch the finish.

Can I use a rubber bath mat on a refinished tub?

No. Rubber mats, especially ones with suction cups, can react with the finish in hot water. Use a non-rubber, slip-proof mat and take it out after each use.

What should I do if my refinished surface chips, peels, or bubbles?

If you notice peeling, bubbling, cracking, or fading, contact us within 48 hours of noticing it. If a sharp object chips the finish, call us right away, within one to two weeks of the accident.

Need your tub looked at again again?

Call (908) 356-1602, monday – saturday, 9 am – 5 pm. Or send us a few photos and we'll get back to you with a free quote.

Call NowGet a Free Estimate